M5Stack Atom Lite RFID with battery pack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed to contain a battery powered RFID reader built on an Atom Lite M5Stack platform
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 430
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
Casing for electronics:
- m5stack Atom Lite
- Battery Pack
- RFID module (or RFID2, they are the same size physically)
Uses m3 heat inserts to keep the top and bottom secure. Lid is recommended to be printed upside-down (such that your heatbed surface is the top when assembled) with no supports as the maximum angle that the chamfers are at are 45 degrees.
Note: The design for the slots for both the atom lite and RFID module has a 1mm space around the perimeter, to allow for easy removal of the modules for prototyping/maintenance - this will not affect the function when assembled as RFID is generally forgiving where it comes to millimetre differences
NOTE: Default spacing for the atom lite slot allows for both the battery pack and top-inserted wires. Spacer model included to pad the bottom of the Atom Lite slot if you want to not use the battery pack, or if you don't need wires inserted on the top surface - in which case you can print a 5mm-thick spacer to flush the atom to the top of the base. Scale the spacer to your needs!