1 / 9
65mm 6-slot Tiny Whoop Storage Box for Racers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage box with 6 slots for tiny whoop racers
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 606
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 6)Remiksy (0)Kolekcje (19)Powiązane
A remix of…
Check out the original 4-slot box by CustomFPV here
Please do let me know if you've spotted an error. DM me first before commenting, I'll do my best to fix it and improve the model. Thanks.
FREE lid customisation on request!!
- Follow me on Instagram @spectrexfpv and DM me with your logo
- If you're coming from discord, send me the files there please!!
- File format: .png, .dxf or .dwg ONLY, other formats will be ignored.
Customisable compartments

Changelog:
- [2025-10-19] - Guides for Compartments
- Added guided option for better compartment stack alignment
Print Settings
- Printer: Bambu Lab P1S
- Filament material: PLA, PETG
- Layer height: 0.2mm or finer
- Wall Ordering: Outside to Inside
- Supports: No
- Infill: 5-10%
- Infill Pattern: Hexagonal/Tri-Hexagonal/Gyroid
- Nozzle Temp: 220°C
- Bed Temp: 60°C
- Travel Speed: 500mm/s
- Acceleration: 4000-10000mm/s²
- Rafts: Doesn't Matter
- Notes: Place the lid upside down to print. If in doubt, look at the [Combined] file