1 / 4
Anti-Stuck Bumper for Xiaomi Dreame F9 Robot Vacuum — zdjęcie 1
1 / 4

Anti-Stuck Bumper for Xiaomi Dreame F9 Robot Vacuum

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tired of your robot vaccum getting stuck under low furniture? This 3D printed bumper prevents it from sliding too fa

Ocena
0 / 5
Polubienia
14
Pobrania
46
Wydruki
0
Wyświetlenia
633
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I’ve had problems with my Xiaomi Dreame F9 robot vacuum getting stuck under low furniture like my bookshelf.

This bumper is a solution I came up with. It fits snugly on the front brim of the robot and prevents it from going too far under shelves, sofas, etc. Since I added it, my Dreame F9 has not had any problems with it attached, but I recommend you place it between the cameras as I have.

I have also made different heights depending on your needs. Just measure from the top of the robot and the side of the obstacle to determine how much height you might need.

Features

  • Simple upgrade to stop your vacuum from getting stuck
  • Easy to print and attach
  • Doesn’t affect cleaning performance
  • Lightweight and durable

Print Settings (recommended)

  • Material: PLA or PETG
  • Infill: ~35%
  • Layer height: 0.2 mm
  • Supports: Not required

Note
I designed and tested this for the Xiaomi Dreame F9, but it may also work with similar Dreame models.

Tagi