Sony BVM/PVM CRT Speaker Supports - Square Vent on Top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanger brackets for use hanging speakers using the side vent squares on a Sony PVM CRT TV that only has top venting
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Hanger brackets for use hanging speakers using the top vent slots on a Sony BVM/PVM CRT TV. I designed around a Sony BVM-D24 and have not tried with other model PVM/BVMs but I would be surprised if Sony used a different square vent spacing or size.
This model is only for units with no side venting. Hooks drop into the top vents and hang the speaker over the side of the CRT. There are two models one with pegs specifically for Sony SS-X1A speakers and another for use with 3M double sided tape to affix to the side of a speaker.