Case for Lolin V3 ESP8266 with 2 ThermoCoupler Connectors for Reed switches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case I designed and use for the Lolin breakout board and 8266 chip. I use this with Home Assistant Automation
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a case I originally designed to use with the Lolin V3 breakout board and ESP8266 module. It has 2 round thermocoupler connectors or 2 square thermocoupler connectors for connecting to reed switches. I install the reed switches on my doors to get the status of OPEN or CLOSED for Home Assistant automation software. This could be used with other software as well.
There are 2 different styles of TC connectors used in these cases. I have included files for both. The round ones can be hard to find. The rectangle ones are more common.
Items Needed:
- 1 - Node MCU Ver. 1 Board
- 1 - Lolin ESP8266 MCU
- 1 - 12VDC Power Supply
- 2 - Thermocoupler connectors Square type: K-Type Panel Mount Thermocouple Miniature Socket and Plug Connector(Yellow)
- 4 - M3x6mm Socket Head Screw
- 1 - 4010 5VDC fan - The fan is optional for improved ventilation.
Printing with supports is recommended.