Puzzle Table Screw Clip (Picture Frame Backing Clip)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Puzzle Table Screw Clip made for a Large 34"x26" Jigsaw Folding Portable Puzzle Table with Wooden Cover Backing.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a Puzzle Table Screw Clip was created to work for a Large 34"x26" Jigsaw Folding Portable Puzzle Table. However, this Clip can be utilized for Large Picture Frame or as Picture Backing Clips.
- The Main Screw Hole is sized for a #6 Flat Head Phillips Wood Screw.
- I used a #6 ¾ inch Phillip Screw for the Puzzle Table.
- The screw hole has dimensions of the larger opening being 6.5mm diameter, depth of 4.9mm and the smaller opening of 3.88mm diameter. So other Screws could be used.
Print Settings:
This design has been printed with a layer height of 0.2mm and a default High Flow Nozzle of 0.4mm on a Prusa Mk4s. Infill was set to 20% for a little extra fill but I’m positive that 15% or less will work. No additional Supports are needed.
The print model has been optimized for PLA+ or PTEG, so I recommend one of these filament types for structural sturdiness. I am also sure regular PLA will work just fine. I have not tried additional filament types so it would be great to see how they hold up. This is a Structural print so it don’t have to be too fancy.
Assembly:
That is very easy. Simply slide the screw into the screw hole securing it with a screw driver into the predrilled hole in the wood.