Puzzle Table Screw Clip (Picture Frame Backing Clip)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Puzzle Table Screw Clip made for a Large 34"x26" Jigsaw Folding Portable Puzzle Table with Wooden Cover Backing.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is a Puzzle Table Screw Clip was created to work for a Large 34"x26" Jigsaw Folding Portable Puzzle Table. However, this Clip can be utilized for Large Picture Frame or as Picture Backing Clips.
- The Main Screw Hole is sized for a #6 Flat Head Phillips Wood Screw.
- I used a #6 ¾ inch Phillip Screw for the Puzzle Table.
- The screw hole has dimensions of the larger opening being 6.5mm diameter, depth of 4.9mm and the smaller opening of 3.88mm diameter. So other Screws could be used.
Print Settings:
This design has been printed with a layer height of 0.2mm and a default High Flow Nozzle of 0.4mm on a Prusa Mk4s. Infill was set to 20% for a little extra fill but I’m positive that 15% or less will work. No additional Supports are needed.
The print model has been optimized for PLA+ or PTEG, so I recommend one of these filament types for structural sturdiness. I am also sure regular PLA will work just fine. I have not tried additional filament types so it would be great to see how they hold up. This is a Structural print so it don’t have to be too fancy.
Assembly:
That is very easy. Simply slide the screw into the screw hole securing it with a screw driver into the predrilled hole in the wood.