Alpine Remote Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alpine car stereo remote holder. Remote slides in from the front and rests on the white strip of velcro so no rattles…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Alpine car stereo remote holder. Remote slides in from the front and rests on the white strip of velcro so no rattles happen while driving with remote in place. Could be mounted vertically if desired. Enjoy.
Print Settings
Printer:
CubePro DuetWIFI Converted
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
100%
Filament:
Generic ABS
Any Color
Notes:
Printed in abs at the time but you could use petg also. Pla is not sugessted as it doesn't flex enough to slide the remote in without cracking the sides and it won't handle the heat in a vehicle either due to the low glass transition temperature. Happy printing.
Tinkercad
Category: Automotive