LED Tiny Whoop gate clamp for sharkbite tubing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 2-piece clamp for making Tiny Whoop gates using sharkbite (or similar) 16mm OD tubing with LEDs inside!…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a 2-piece clamp for making Tiny Whoop gates using sharkbite (or similar) 16mm OD tubing with LEDs inside! Print 2 identical halves and bolt together with M4x20 hardware. It is sized for a approx 16" gate (1200mm tubing/LED strip) but you could probably go bigger before the radius looks weird.
The bottom of the gate is sized to fit in 1/2" PVC couplings. There is a tapered hole that you can jam a screw in if you need to make that connection tighter.
Added 21" gate version, using 1600mm tubing & LED strip
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
30%
Category: R/C Vehicles