BetaFPV 65X Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
edit 2/6/2020: added taller lid for longer 300mah batteries Based on my previous…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 686
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
edit 2/6/2020: added taller lid for longer 300mah batteries
Based on my previous designs: https://www.thingiverse.com/thing:2515934 https://www.thingiverse.com/thing:2745794 https://www.thingiverse.com/thing:3277832
This is the best design yet!
Holds the drone, charger, and 22 1s 300mah size batteries. Fits any 65mm tiny whoop or similar drone. There are some pockets for extra props and prop wrench.
Uses this BetaFPV charger: https://www.amazon.com/BETAFPV-Charger-Board-Battery-Adapter/dp/B072BXBSX5/ref=sr_1_3?keywords=betafpv+charger&qid=1554820935&s=gateway&sr=8-3
Just take off the bottom plate and screw into the bottom of the box.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: generic PLA
Category: R/C Vehicles