1 / 1
Microphone Boom Arm Mount To Monitor Arm — zdjęcie 1

Microphone Boom Arm Mount To Monitor Arm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom adapter to fit 12mm microphone arm to any 35mm monitor arm pole. Designed in single part for a more fixed setup.

Ocena
5 / 5
Polubienia
11
Pobrania
66
Wydruki
0
Wyświetlenia
454
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

A quick adapter to mount your generic Microphone stand like this one, to fit any 35mm Pole shaped monitor stand. Features sturdy cable clip for tidy setup!

Hardwares required:

  1. Any pole based monitor arm/mount system with diameter of 35 mm
  2. Basic microphone stand, with detachable C-clamp. The insides should be around 12 mm 
  3. M4x20mm Bolt, and M4 hex nut, 2 pairs

Install instructions:

  1. Remove the C Clamp from the microphone mount
  2. Chuck your mic stand to the printed part
  3. slide the Adapter into the monitor pole
  4. Tighten the 2 bolts

Tagi