Ender 3 v3 SE KE - Rotatable Klipper touch screen, housing and holders, Portrait mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Klipper screen housing and holders with instructions. Can rotate left and right
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Klipper screen housing and holders with instructions. Can rotate left and right.
There are 2 types of holders. One compatible with 10mm threaded shaft from gantry support mod. Other without the shaft holder.
This was made with Raspberry Pi Zero 2W and a Spotpear 7 inch Touchscreen
I used the bundle RPI-Touch Case, it comes with all screws and thread mounts needed for the setup.
I used This Guide to install Klipper for my Ender 3 V3 SE
INSTRUCTIONS TO ROTATE KLIPPER SCREEN:
You can find the text file with instructions at the bottom of files section under the name
KLIPPER_Rotate_90.txt
---- If you want to restore display rotation to original state, use the command in the file:
ONE_LINE_RESTORE_KLIPPER_SCREEN_ROTATION.txt