Control knob for 6mm diameter shaft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm building some electronic gadgets and I needed some knobs. I didn't like any of the knobs that I found so I…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm building some electronic gadgets and I needed some knobs. I didn't like any of the knobs that I found so I designed my own.
Comes in versions with and without a direction marker on the surface; for extra fun, if you have dualstrusion you can also fill in the mark with a different color. (I haven't had any luck with that on my Replicator Dual but maybe someone else will have a better result.)
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.05
Infill:
100%
Notes:
ABS is probably better, but PLA works fine.
Category: Electronics