Mounting block for filament spool arm - Qidi Plus 4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This block is a 3d printable replacement for the black plastic block on the top rear of the printer case
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This part is a 3d printable replacement for the black plastic block that mounts to the top rear left side of the Qidi Plus 4 printer for attaching the filament arm. This parts fits and works like the original, with minor modifications to make it suitable for 3d printing.
This model is a suitable either as a replacement part, or as a starting point for remixing the part into a new variation.
I test fit the model and it worked just fine.
Print in the upright position. No support required. Suitable for PLA or engineering materials like ABS, ASA, or PA6-GF.