Another pi zero case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another 'quick printing' pi zero case, Several surface mountable variations available and two different lid designs.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is designed to be a 'quick printing' pi zero case, it is designed to be a very precise fit and has an opening for the processor heatsink on top and the pi logo at the base to allow for easy removal of the pi and reduce material usage.
The emphasis of this case is reduced print material, it has very thin walls and precision fitment, ideal for printing in ABS and other engineering filaments as well as offering great cooling ability.
This case is NOT really designed to be printed in PLA, it may be too brittle with the thin walls. I have printed using PETG, PETG-FG and ABS with success though.
You can either just rely on the pi staying in the case due to friction, or you can use small screws. I am not going to recommend hardware as it depends on your application and what you have available.
It has an opening for a camera lead and a micro-sd card on either end.
I have included some slight design variations - There is a version with internal holes for surface mounting, there is a version with a screw tab to surface mount with an external single screw and there are two lid variations, one with a header cutout and one without it.