1 / 3
Garage C-section Galvanised Steel Purlins 140mm Beam Hangers — zdjęcie 1
1 / 3

Garage C-section Galvanised Steel Purlins 140mm Beam Hangers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip on Hangers for Metal Garages constructed from Galvanised Steel C-section 140mm Purlins.

Ocena
0 / 5
Polubienia
5
Pobrania
20
Wydruki
0
Wyświetlenia
190
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial

I wanted to suspend some tools from my Steel Beam construction garage.  The frame is constructed from 140mm Galvanised Steel Purlins (C-Section) which gives a nice clip-on point behind the beam.

For reference the dimensions of the beam are:
Height: 140mm (this is fairly standard)
Depth: 63mm
Rear Lip: 14mm
7mm fillet.

These hooks simply slide over the beam and clip into place. To remove, simply rotate them backwards and they lift out.

I recommend printing with the following setting for strength:
Print on side (same orientation as download is provided), in PETG or better.
Perimeters: 4
Infil: 25% Gyroid

Two models require supports, one does not.


 

Tagi