Garage C-section Galvanised Steel Purlins 140mm Beam Hangers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip on Hangers for Metal Garages constructed from Galvanised Steel C-section 140mm Purlins.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
I wanted to suspend some tools from my Steel Beam construction garage. The frame is constructed from 140mm Galvanised Steel Purlins (C-Section) which gives a nice clip-on point behind the beam.
For reference the dimensions of the beam are:
Height: 140mm (this is fairly standard)
Depth: 63mm
Rear Lip: 14mm
7mm fillet.
These hooks simply slide over the beam and clip into place. To remove, simply rotate them backwards and they lift out.
I recommend printing with the following setting for strength:
Print on side (same orientation as download is provided), in PETG or better.
Perimeters: 4
Infil: 25% Gyroid
Two models require supports, one does not.