Crossbow Filament Cutter Sherpa Mini Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small shim to sit on top of Crossbow Filament Cutter Holder to allow full cutter actuation with Sherpa Mini mounted
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
A printed shim to provide needed spacing between the Crossbow Filament Cutter mounted in the Filament Cutter Holder and a Sherpa Mini (printed or CNC) to fully actuate the filament cutter and avoid interference between the cutter and the body of the Sherpa Mini.
The Sherpa Mini Mount Spacer simply sits between the cutter holder and Sherpa Mini providing enough clearance to fully actuate the cutter without interfering or requireing modificat ion of the Sherpa Mini. A small bowden tube segment should fully pass from the Sherpa Mini through the spacer and to the top of the cutter holder.
BOM:
- No additional hardaware required
- May need ~3mm longer screws to mount Sherpa mini + Spacer + Crossbow Filament Cutter Holder
Print settings:
- Standard Voron print settings (4 walls, 40% gyroid infill, 4 top and bottom layers, 0.2mm layer height, ABS or ASA)
Also available in my mods repository: https://github.com/jmlw/3d_printing