Voron Fan Hub JST-XH 3-way
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
JST-XH 3-way hub for powering 2 fans from a single fan output.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Description
This is a fan hub that provides 3xJST-XT 2-pin connectors that allows for 2 fans and the lead-in cable to be connected to it.
There are 2 options provided, one mounts to the Voron fans (with heatset inserts added to the fan holes) and the other can mount to an extrusion or any other place a bolt or screw can be used.
Circuit
The electronics doesn't require a manufactured PCB, it uses a small piece of Stripboard/Veroboard to mount the JST-XH sockets. Any prototype board with 2.54mm (1/10th inch) pin spacing can be used, however using the Veroboard means that you don't need wires to create the circuit. All connectors are mounted on the board facing in the same direction, so that they are electrically a parallel connection.
You need a grid of 7x2 holes. The board can be cut to size by scoring with a box cutter along a line that is aligned with the holes, and then bending to snap it. You might need pliers to help bend it. Once you have mounted the connectors as shown, trim any excess board material protruding past the connectors.
Printing
These should be printed as they appear in the STL file. The Holder prints upside down with a small overhang, the other parts print right side up. So supports are required.
BOM
- 3 x JST-XH socket
- 1 x Stripboard/Veroboard or other prototyping board cut to size
- 1 x M3x4 SHCS bolt (only for Voron mount)
- 3 x M3x8 SHCS bolts (only 2 needed for Voron mount)
- 2 x M3X4X5 heatset inserts (for Voron mount - inserted in fans)