schmatz fatz Water Bottle Cap Lever Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement lever/hook for the schmatz fatz water bottle's cap locking mechanism.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Our kids have schmatz fatz water bottles and on one the lever of the closing/opening mechanism broke. I remodelled this to print a replacement, which incidentally even fits better in colour than the black original (using sunlu fuchsia PLA+ for the pink bottle)!
I strongly advice a 0.2mm nozzle for the needed accuracy, because 0.1mm difference can decide between smooth operation and clamping down like hell to get the thing open.
Also you might need to drill the hole wider for the axle/pin a little, depending on how dialled in your printer is.
For better looks I advice a smooth PEI sheet to prevent the “normal” PEI texture and be aware, that PLA usually is not dishwasher-save, because of the temperatures. So either wash the cap by hand or try PETG or any other heat resistant, non-flexible Filament, which is reasonably food-save,
Boost MeDo you want more flexible and elaborate as well as functional print models? Give me a boost and I continue uploading all my relevant creations!