15mm camera rod swivel joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
attach two 15mm rods together and rotate them in 12 different angles
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I couldn't find a similar model so I made it myself. With this you can attach a rod to another rod in an angle, in 12 different angles, kind of like an analogue clock. It hould them pretty secure but I wouldn't put a LOT of weight on it. The reason I wanted this was to rig a little LED panel on top of a camera cart, and a rew rods + this would act as a stable arm for the light. And since I had the rods and a superclamp already, it was cheaper than buying some kind of arm for it.
Compatible with my 15mm / 19mm camera rod holders with dovetail i.e. same distance for the rods.
Hardware:
- 1x M6 x 50 hex bolt
- 1x M6 nut
M6 x 45 could work and be more flush if you find them. M6x40 is too short
You can add a little glue to the wingnut to have a more secure connection, but not necessary.
Printing:
- Print in the orientation in which provided
- Layers 0.2
- Walls 5
- Infill 25% cubic