15mm camera rod swivel joint
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
attach two 15mm rods together and rotate them in 12 different angles
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 119
- Makes
- 0
- Views
- 553
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
I couldn't find a similar model so I made it myself. With this you can attach a rod to another rod in an angle, in 12 different angles, kind of like an analogue clock. It hould them pretty secure but I wouldn't put a LOT of weight on it. The reason I wanted this was to rig a little LED panel on top of a camera cart, and a rew rods + this would act as a stable arm for the light. And since I had the rods and a superclamp already, it was cheaper than buying some kind of arm for it.
Compatible with my 15mm / 19mm camera rod holders with dovetail i.e. same distance for the rods.
Hardware:
- 1x M6 x 50 hex bolt
- 1x M6 nut
M6 x 45 could work and be more flush if you find them. M6x40 is too short
You can add a little glue to the wingnut to have a more secure connection, but not necessary.
Printing:
- Print in the orientation in which provided
- Layers 0.2
- Walls 5
- Infill 25% cubic