1 / 2
Profile 4040 Cable Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A square cable bracket for 4040 profiles that is fixed with a counter sunk M4 screw.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I was looking for cable brackets for better cable management for our ceiling mounted 4040 profiles. I made this design as I wanted something that is screwed down (or up?) to a nut to stop it from sliding along the profile rail.
It's 40x40mm, designed to be screwed into the rail with a M4x10 countersunk screw. It has a hole on the opposite side of screw for easy access with an Allen key or screw driver.
The model went through the following iterations:
- v1: initial version
- v2: stronger walls to not bend as easily
- v3: deeper countersunk hole to better fit the easily available M4x10, addition of a hole for Allen key