Inset for Cassette Tape Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Functional and aesthetic upgrade for the Cassette Tape Dispenser
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a little improvement for the Cassette Tape Dispenser of Ken Mills.
I had the problem that the tape on the hub was sliding out too easily. That's why i designed this little helper, that pushes the hub in. It also makes it look even more like a tape cassette. There is even a little slit where tape can be “threaded in”. The part holds just be friction.
I recommend printing it on its side with tree support for only the long thin “wing”.
If you want to insert the tape, here is a little hint: It's easier if you put two sticky sides together for a little section, so that it doesn't stick to the part .
There is also the FreeCAD source file and step files included if you like modify the design.
Made with FreeCAD (realthunder branch).
The model is for the compact (60% size) version. If you want want it for the big original you have to scale it up by 1/0.6 = 1.666.