Inset for Cassette Tape Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Functional and aesthetic upgrade for the Cassette Tape Dispenser
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 15
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
This is a little improvement for the Cassette Tape Dispenser of Ken Mills.
I had the problem that the tape on the hub was sliding out too easily. That's why i designed this little helper, that pushes the hub in. It also makes it look even more like a tape cassette. There is even a little slit where tape can be “threaded in”. The part holds just be friction.
I recommend printing it on its side with tree support for only the long thin “wing”.
If you want to insert the tape, here is a little hint: It's easier if you put two sticky sides together for a little section, so that it doesn't stick to the part .
There is also the FreeCAD source file and step files included if you like modify the design.
Made with FreeCAD (realthunder branch).
The model is for the compact (60% size) version. If you want want it for the big original you have to scale it up by 1/0.6 = 1.666.