Graphics Card (GPU) Stand/Holder for Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GPU display stand purely for display purposes, to display your old gpu on a nice stand. Made some changes to the…
- Ocena
- 5 / 5
- Polubienia
- 96
- Pobrania
- 553
- Wydruki
- 6
- Wyświetlenia
- 6966
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
GPU display stand purely for display purposes, to display your old gpu on a nice stand.
Made some changes to the original, no supports needed, made the bracket easier to print and a lot stronger, also made it printable on printers with a smaller print bed. The parts are friction fitted together.
Parts:
- GPU_display_stand_base
The base of the stand. 30% infill.
2. GPU_display_stand_bracket_pillar
Vertical pillars for the bracket, 2 of this is needed. Might need to sand the ends down a little depending on your print tolerances. 80% infill.
3. GPU_display_stand_bracket_cap
The top of the bracket, use 2 M3 screws to screw your gpu to the stand. 30% infill.
4. GPU_display_stand_support
Optional support for bigger gpu's (although you'll probably need it for 3 slot cards), makes it more stable and prevents sagging. I used 80% infill for the overhang parts and 30% for the rest. If you can't set infill for specific regions, 60% infill.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
See above
Filament: Generic PLA Any
Category: Computer