DDD Wall Control - Dewalt Right Angle Attachment DWARA120
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the DWARA120 using the DDD wall control system
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I didn't like how the DWARA120 sat in the standard Wall Control holder (see photo), so designed a replacement. This utilizes the DDD Wall Control System.
I would have preferred to use a 1x2 locking plate, but that is 23mm wide and the adapter has a width of roughly 20mm at the narrowest part, so here we are with a 2x2.
This model has the front of the holder angled in to prevent the tool from migrating forward.
I do not have a step/fusion file for this yet, because my design is a clunky hack that I'm embarrassed by, so until I fix it, 3mf only.
In order to have this work as pictured you need to print:
This model
2 x 8mm locking pins