Tardis Valve Cap (Schrader/Car)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My wife was looking for valve caps for her new car and I promised (weeks ago) to try to get something that'd interest…
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 183
- Wydruki
- 2
- Wyświetlenia
- 658
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
My wife was looking for valve caps for her new car and I promised (weeks ago) to try to get something that'd interest her.
Weeks later, I stumbled upon the Parametric Tardis model by Gossamer and I barely had to do any modifications. I pretty much took the "Small" tardis into Tinkercad and widened up the hole a bit. This is NOT threaded, so it should be an easy print. You simply print these out standing up and screw them on - the threads should cut into the soft plastic and be, more or less, affixed.
Feel free to size down 5% for a tighter fit, but I felt I was forcing it at that point, and ended up at the size it is now.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select Plus
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.1, but probably doesn't matter much aside from the small size
Infill:
20, but I'm not sure it matters much
Filament: eSun PLA+ Blue, of course.
Notes:
You could probably get away with .2 if you want a faster print, but you'll likely lose a lot of the already fine detail.
Category: Automotive