Tardis Valve Cap (Schrader/Car)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My wife was looking for valve caps for her new car and I promised (weeks ago) to try to get something that'd interest…
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 183
- Makes
- 2
- Views
- 658
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
My wife was looking for valve caps for her new car and I promised (weeks ago) to try to get something that'd interest her.
Weeks later, I stumbled upon the Parametric Tardis model by Gossamer and I barely had to do any modifications. I pretty much took the "Small" tardis into Tinkercad and widened up the hole a bit. This is NOT threaded, so it should be an easy print. You simply print these out standing up and screw them on - the threads should cut into the soft plastic and be, more or less, affixed.
Feel free to size down 5% for a tighter fit, but I felt I was forcing it at that point, and ended up at the size it is now.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select Plus
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.1, but probably doesn't matter much aside from the small size
Infill:
20, but I'm not sure it matters much
Filament: eSun PLA+ Blue, of course.
Notes:
You could probably get away with .2 if you want a faster print, but you'll likely lose a lot of the already fine detail.
Category: Automotive