Quicko Mini STC T12 Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made some adjustments to this thing https://www.thingiverse.com/thing:2817296 to fit my Quicko Soldering station…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made some adjustments to this thing https://www.thingiverse.com/thing:2817296 to fit my Quicko Soldering station board to. I wanted my connector to sit flush to the PCB so I inset the spot for the split ring to sit in the face, there were a few other dimensions that needed adjustment for my particular board so I made them as well. My modifications can be found in the attached SCAD file in case you also need to make some changes.
You will also need to download the fix.stl file from the original project, and the Prism mount if you want to use that.
Category: Tools