Quicko Mini STC T12 Panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made some adjustments to this thing https://www.thingiverse.com/thing:2817296 to fit my Quicko Soldering station…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 85
- Makes
- 0
- Views
- 565
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made some adjustments to this thing https://www.thingiverse.com/thing:2817296 to fit my Quicko Soldering station board to. I wanted my connector to sit flush to the PCB so I inset the spot for the split ring to sit in the face, there were a few other dimensions that needed adjustment for my particular board so I made them as well. My modifications can be found in the attached SCAD file in case you also need to make some changes.
You will also need to download the fix.stl file from the original project, and the Prism mount if you want to use that.
Category: Tools