Spool Lift for PONNOR Thermal Label Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got tired of removing the fan-fold labels every time I wanted to load up a spool!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a Rollo thermal printer to print shipping labels for work. I bought a cheap stand that keeps my stack of fan-fold 4x6 labels from sliding around. Here's the one I bought from Amazon (PONNOR brand).
I've recently started using it for custom branded stickers that I load on the spool holder. I got annoyed real quick that I had to remove the stack of fan-fold labels every time I wanted to load up a spool - the spool would hit the stack of shipping labels if I didn't remove them entirely.
I decided to make a “lift kit” that moved the spool up and out of the way so that I wouldn't have to remove the fan-fold labels when loading a roll on the spool holder. I also made the new spool crossbar be a pivoting arm so that it's super duper easy to load up a spool. Hopefully the annotated image shows how to use it.
I designed this around prototyping hardware I had on hand, but I bet you can riff on it with whatever you've got.
- 4x thread-forming M3 FHCS (McMaster link)
- You use 2x per side to attach the “lift arms” to the static crossbrace
- You could probably just use a normal M3 FHCS and drive it into place, but I haven't tried
- I think there's also enough material to drop some M3 heat-set inserts into the static crossbar, but you'd have to enlarge the holes first
- 1x thread-forming M3 BHCS (McMaster link)
- This is the world's laziest pivot
- I originally planned on using a normal M3 SHCS, but I reached for this thread-forming BHCS instead
- You drive this into place to trap the swing arm into the lift arm that has a hole
- Quick note - the swing arm technically has a gentle radius on it… it's actually really hard to tell in real life so you can probably install it however you want… but it's intended to be radius-side-up so that it's tangent to the spool core ID
You need a couple supports on the static crossbar, but that's it. I printed everything in PLA with a buncha walls and infill to make it stiff.
This could absolutely be better, but R01 is good enough and we're calling it done. Enjoy!