1 / 2
Spool Lift for PONNOR Thermal Label Holder — image 1
1 / 2

Spool Lift for PONNOR Thermal Label Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Got tired of removing the fan-fold labels every time I wanted to load up a spool!

Rating
0 / 5
Likes
2
Downloads
7
Makes
0
Views
150
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

I have a Rollo thermal printer to print shipping labels for work. I bought a cheap stand that keeps my stack of fan-fold 4x6 labels from sliding around. Here's the one I bought from Amazon (PONNOR brand).

I've recently started using it for custom branded stickers that I load on the spool holder. I got annoyed real quick that I had to remove the stack of fan-fold labels every time I wanted to load up a spool - the spool would hit the stack of shipping labels if I didn't remove them entirely.

I decided to make a “lift kit” that moved the spool up and out of the way so that I wouldn't have to remove the fan-fold labels when loading a roll on the spool holder. I also made the new spool crossbar be a pivoting arm so that it's super duper easy to load up a spool. Hopefully the annotated image shows how to use it.

I designed this around prototyping hardware I had on hand, but I bet you can riff on it with whatever you've got.

  • 4x thread-forming M3 FHCS (McMaster link)
    • You use 2x per side to attach the “lift arms” to the static crossbrace
    • You could probably just use a normal M3 FHCS and drive it into place, but I haven't tried
    • I think there's also enough material to drop some M3 heat-set inserts into the static crossbar, but you'd have to enlarge the holes first
  • 1x thread-forming M3 BHCS (McMaster link)
    • This is the world's laziest pivot
    • I originally planned on using a normal M3 SHCS, but I reached for this thread-forming BHCS instead
    • You drive this into place to trap the swing arm into the lift arm that has a hole
    • Quick note - the swing arm technically has a gentle radius on it… it's actually really hard to tell in real life so you can probably install it however you want… but it's intended to be radius-side-up so that it's tangent to the spool core ID

You need a couple supports on the static crossbar, but that's it. I printed everything in PLA with a buncha walls and infill to make it stiff.

This could absolutely be better, but R01 is good enough and we're calling it done. Enjoy!

Tags