Samson SR850 3.5mm socket mod cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3d printed replacement for the cap on the side of the SR850 headphones which can fit a 3.5mm socket. .step included!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A common breaking point of the Samson SR850 headphones is the cable, as the wire will eventually tear itself from the actual headphones thanks to thin cable wires and minimal strain relief. Luckily, the SR850 is also a great pair for modding as accessing the wires only requires the removal of a friction-fit plastic cap cover and one screw. This model is a replacement of the side cap which can fit a 3.5mm socket for you to solder onto the headphones.
Quite a few models exist for this mod already, such as dusakus's, but because there are many different types of 3.5mm socket, it's hard to use a model and just assume it fits with what you already have. I've decided to create my own and publish a .step file, so anyone with the same problem can just edit the files as they need.
Happy printing!