Little Nightmares peephole decoration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A decoration for your door to peek into the world of Little Nightmares.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Official logo to SVG to STL to door decoration.
The diameter is 35mm. If you have like me a cover print everything a bit thinner. I chose to ignore that 3mm is too high. But you can still look through the hole, so I don't care that much.
I also printed it right side and glued Six on wrong side to match the way the door opens and have a smooth finish. If you want to glue her on right side, flip the print 180°.
You can also print Six in yellow and the eye in the grey-green of the games.
A problem that I did not have but you could run into is the adhesion of Six's feet. Be mindful about that.