Little Nightmares peephole decoration
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A decoration for your door to peek into the world of Little Nightmares.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Official logo to SVG to STL to door decoration.
The diameter is 35mm. If you have like me a cover print everything a bit thinner. I chose to ignore that 3mm is too high. But you can still look through the hole, so I don't care that much.
I also printed it right side and glued Six on wrong side to match the way the door opens and have a smooth finish. If you want to glue her on right side, flip the print 180°.
You can also print Six in yellow and the eye in the grey-green of the games.
A problem that I did not have but you could run into is the adhesion of Six's feet. Be mindful about that.