1 / 2
Piston ring clamp for 42mm Pistons
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp your piston ring for easier mounting of the Cylinder. Made for a Dolmar 420, but should work with any 42mm piston.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Clamp your piston ring for easier mounting of the Cylinder.
Made for a Dolmar 420, but should work with any 42mm piston.Clamp your piston ring for easier mounting of the Cylinder. Made for a Dolmar 420, but should work with any 42mm piston.
Quick explanation with ZERO guarantee:
- Insert your piston ring(s) at their proper position.
- Add a bit of oil to the contact surface of cylinder + piston.
- Put the clamp over your piston ring(s) thightning it using the clamp tabs
- Keep the clamp as low as you can so you can actually insert the piston into the cylinder.
- Insert the piston into the cylinder, press down the clamp using the cylinder until all piston-rings are inside the cylinder
- remove the clamp, and finish reassembly :D
The pictures show the basic procedure with my old, broken piston/cylinder.