1 / 2
Piston ring clamp for 42mm Pistons
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clamp your piston ring for easier mounting of the Cylinder. Made for a Dolmar 420, but should work with any 42mm piston.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 1
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Clamp your piston ring for easier mounting of the Cylinder.
Made for a Dolmar 420, but should work with any 42mm piston.Clamp your piston ring for easier mounting of the Cylinder. Made for a Dolmar 420, but should work with any 42mm piston.
Quick explanation with ZERO guarantee:
- Insert your piston ring(s) at their proper position.
- Add a bit of oil to the contact surface of cylinder + piston.
- Put the clamp over your piston ring(s) thightning it using the clamp tabs
- Keep the clamp as low as you can so you can actually insert the piston into the cylinder.
- Insert the piston into the cylinder, press down the clamp using the cylinder until all piston-rings are inside the cylinder
- remove the clamp, and finish reassembly :D
The pictures show the basic procedure with my old, broken piston/cylinder.