Counting matching models…
I was on the Gridfinity train, planning out my first drawer, and I had ALMOST enough room for one more section, but not quite. So, I made a filler version that is, of course, 7mm smaller in width than the original size. That way, I don't…
Fits all the bits from this electric precision screwdriver kit . In addition it has storage on the side to hold all the various tools I use for 3D printing. I included the step file and f3d file if anyone wishes to remix/modify. From the…
The is a two piece adapter that allows you to attach a bag or container with a 42mm male thread like a Befree or Hydro_pack to a water filter with a 28mm female thread like is used with the Sawyer Squeeze water filter. Both parts can be…
This fits around a 38mm or 1.5in roll cage or roll bar tube and holds a standard GoPro mount. It is designed .25mm small to allow for clamping force and has space for M4 hardware to fasten it. The standard GoPro mounting hardware will…
I liked varinds design quite a lot, but my drain had a bigger diameter, around 42-43mm. So I adapted the Part, thanks to the included f3d file. I also made it not as tall, because my drain is shorter. It works really well, printed in TPU.
Made out of PETG for Flexibility and Heat Resistant Hardware: 1x M3 20mm cap head screw 1x M3 nylock nut 42mm Zoom ring:
Print settings are up to you, there are no special settings needed. They are designed to not require supports if you print with the long part of the body facing up. Print on a textured bed as that surface will be the front of the VF. Each…
i have adapted the holders for 37mm and 42mm pliers. In addition, I removed a little material from the underside so that the print bed adhesion is better
Always wanted a throw lever to quickly change the zoom level on my Vortex Crossfire 3-9x40 scope, so I made one. Actually two, one with a straight lever and one with an angled one to interfere less with the bolt handle (see images). My…
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 52mm…
Update Apr 26, 2025: Added a 42mm tall version (still on a 25mm baseplate) since the main one seemed small next to my other werewolves Added variant using my new hands collection - more better claws, I've included this in both 32mm and…
gedruckt aus PLA, 1,2mm Wandstärke, 17% Füllung, Muster: Dreiecke (mit zwei Linien) Eine separate Schraube zur Befestigung der Kameras wird benötigt evtl. muss der Bügel von einigen Schrauben entfernt werden Ich habe oben (beim Druck…
It works fine and does as intended. Use your favorite print settings. A bit of support seems necessary. (I'm not too picky about the finish, so I used my Ender 3 with PLA through a 0.4mm nozzle at: Layer height 0.3 Extrusion width 0.6…
Fairing Threaded Standoffs / Spacer - Transalp 650 M10 Thread Mod. 14-42mm - Boccola Perno Carena Transalp 650 Mod. 14-42mm Filetto M10 M10x14mm M10x42mm Suitable for:…
Simple scope cover. It holds with friction, but you can add a torsion spring to make it even more tacti-cool. When closed, it is held by a small latch. It is made for a rifle scope with an outer diameter of the tube end of 42 mm. I also…
The charging stand is tested with the 42mm version, but it should work with the 38mm as well. It requires supports when printing. Leave a like if you like the charging stand! Print settings: supports required
I was on the Gridfinity train, planning out my first drawer, and I had ALMOST enough room for one more section, but not quite. So, I made a filler version that is, of course, 7mm smaller in width than the original size. That way, I don't…
Gridfinity - 42mm Stepper Motor Holder Included are 7 sizes 1 - 7 steppers. Fusion365 Fusion 360 File included for easy remixing Parameteric file, to change the number of steppers choose 'modify parameters' and the parameter name is:…
Most race sanctioning bodies require clamps on the roll bar to keep the harness from sliding around. This fits around a 38mm or 1.5in roll cage tube to keep the belts in place. It is designed .25mm small to allow for clamping force and…
stand for IPHONE X/XS AND for APPLE WATCH 42MM Print instructions 4 top layers 5 bottom Layers 3 shells 20% infill
Printable without support Two piece design Made for roadbike with 142mm rear axle 12mm diameter Rotates with chain Works in every gear
Just a simple subtraction to fit a 120ml bottle of vaping liquid. It is a tight fit, so expect it to come off with the bottle, but don't worry, it won't fall ;)
It fits the sawyer squeeze to the hydrapak ultraflask (speed 600ml) threads. printed without supports, adhesion, and no cleanup. hydrapak threads: pitch 3.4 mm
This tool helps you open up your watch if you want to do some cleaning or other maintenance like I had to do. I needed it to fix my automatic winding mechanism in my watch (Fossil ME3181) but did not have the tools available, so after a…
Prints on Prusa Mini in PETG. Adapts the pretty huge, odd-shaped hole in the Starlink Mini antenna base to a ring accepting PVC pipe with 42mm outer diameter. Did not take a picture of an acutal print - this model is the adapter between…
The Klickfast Belt Dock by @ItsGhost is an excellent model, but unfortunately the sizes aren't right for the current UK Ambulance Service issue nylon webbing belt. The belt is 40mm deep, so the 38mm variant is slightly too small, and the…
I bought the HEPA filter linked in the original BentoBox filter comment section from Amazon. about 42mm x 83mm. Remixed the filter container to fit it exactly. also reduced over all height. works with the original cover. I have not…
17% заполнение гироидом. Поддержки да
Modified the original mount to fit 42mm poles. Compatible with Star link Gen 3 Satellite Receiver
This old Macintosh ('80) has been designed to hold and charge the 42mm Apple Watch. I modified this model to make the front frame more resistant. Therefore, I added 2mm thickness to both side walls. The original model has been designed by…
External lenscap for 42mm bore lenses (or whatever thats that size). Made to snugly fit a Zenit Jupiter 8 LTM Inner bore is 41.98mm and will perfectly fit the lens if your printer is calibrated. Be aware you might have to re-print with %…
📦 Complete Gridfinity Base Plate Pack This pack includes a full set of Gridfinity base plates from 1x1 to 1x10 , designed according to the official 42mm unit standard . Perfect for: drawer organization workshop setups storage optimization…
This is a holder for a BTT EBB42 or any other 42mm Toolboard, that secures on the side of the LGX Lite
Potentiometer knob for a knurled (press fit) knob with a 6mm ID and 42mm OD.
Adapter for 250g SUNLU spools with an inner diameter of 42mm. Considered 15% infill but with 3 walls to make it rigid. The two pins have the anti-rotational function, locking the two pieces with the pins in the side holes of the spools…
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
Olympus M.Zuiko 14-42mm EZ lens case. Internal size: * diameter 62.5mm * height: 32mm I've printed it using Sunlu PLA+ filament using a 0.4mm nozzle. Would recommend to print using the 0.08mm Extra Fine setting so thread is smooth
So K0ECW remixed this model to make it fit better with the rails, but the rails and the body were detached. No worries, here's a fixed model. PRINT WITH SUPPORTS! I used tree supports because they are very easy to remove. Pair them with…
Holder for a DualCo grease gun on 1x1/4" MDF pegboard. Should work with other 1" pegboards, but might not fit as well. The grease gun on the right has a Luer Lock adapter with the fantastic grease brush from Radar Laboratories - I highly…
I use it to store my Isopropyl alcohol spray bottle. The inner diameter is 42mm and the depth is 25mm. It fits the 40mm Bottle well. Once again I used Johannes container frame as a base for the hooks and accordingly chose CC BY-NC 4.0 as…
This is the version without the embossing visible in the photos. More versions are available to my patrons .
⭐ Christmas Star Tealight Holder – 3D Print 🎄✨ Create a warm and magical holiday atmosphere with this star-shaped Christmas tealight holder ! ⭐🕯 The model features a charming winter village scene complete with houses, trees, a church ⛪,…
Durch diesen Adapter kann der Saugschlauch für den Poolsauger direkt an der Ansaugöffnung innen am Pool angesteckt werden.
Lampshade with 42mm hole to mount on standard (At least in closest shop =) lamp holders. Slightly squared to the bottom (Or top if looking at how it is printed) Use STEP file, STL included only for preview. Print in Vase Mode, 5 bottom…
I was on the Gridfinity train, planning out my first drawer, and I had ALMOST enough room for one more section, but not quite. So, I made a filler version that is, of course, 7mm smaller in width than the original size. That way, I don't…
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here. Update 01: new photos (you can't see…
I figured somebody would eventually design this, why not me? Roughly based on a standard Gridfinity 1x1x6u bin. No base-grid required.…
Die Überwurfmuttern eines PE Kugelhahns mit 1" Gewinde hat ein Innenleben das man beim Festziehen mit Zange schnell beschädigt. Der Hakenschlüssel ist dafür passend. Ganz sicher auch für andere Anwendungen an PE Rohren geeignet.
Mounts with a M3x12 screw to “Insert-with-M3-dual.stl” from the HSW repository (linked below under "Model origin". CAD:…
Description: Simple but elegant lampshade, for best results - paint white on the inside, or print with white filament and paint desired color on the outside. Instructions: Use fuzzy skin 0.25 length, 0.1 thickness. Tested on Bambu Lab…
Seamless geared follow focus ring for Panasonic MFT 14-42mm F/3.5-5.6 lens. The focus ring was made to work with DJI Ronin SC pro combo follow focus motor. The fit is a bit too tight so the ring needs to be sanded down to fit on the lens.
Lens Hood for Panasonic Lumix with 14-42mm f3.5-f5.6 Lens This lens hood fits Panasonic / Olympus 4/3rds lenses with bayonet hood mount. To put the lens hood on, squeeze the hood opposite the ears. The lens hood stays in place because of…
Solar filter for binoculars with 42mm objective lenses. These work both on my Nikon Monarch HG 10x42 and Nikon Monarch 7 10x42 binoculars and will probably fit other similar sized binoculars. This solar filter fits nicely on the end of…
No supports required. Infill >20% for stability Recomended in PETG The magnets should press fit in Hygrometer : https://www.amazon.es/dp/B088NN6WY6 Magnets : https://www.amazon.es/dp/B074C79DJS
Simple sstand for 42mm temp / humidity gauge. Made for these (Type D) china eBay gauges, but should work with any 42mm gauge. Stand is angled a bit for best viewing angle. Print hole down. Mine is printed with 0.6n 0.3mm using PrusaSlicer…
Soporte para canaleta de cables de 42mm
Hello This is the adaptor that enables you to use almost every Orbea road bike that uses a 12x142mm thru-axle on a Wahoo Kickr Snap trainer . The design is taken from the original Wahoo Kickr Snap 12x142mm Thru Axle fine Adaptor , with…
I printed this plan and realised it didn't fit my Withings scan watch, so I took the inspiration from the plan and designed my own stand. Made this plan , but it had some flaw so I create a new one which work perfectly! Its made of two…
I originally bought some A5 planner dividers on Amz but they curled up over time which drove me crazy. Designed and printed these thin planner dividers and it took a few tries, originally they were too thick and were too rigid, but think…
Print settings: PETG Screw with 60% infill und 5 Perimeter and no Bot Layers hi zusammen, die Wäschespinne steht hier schon ewig, leider sind die Kunsststoffteile von der UV-Strahlung sehr brüchig geworden. Das Schiebbare Element ist…
Velbon Quick Release Platform 42mm Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.20 Infill: 100% Filament: Polymaker Polyflex PLA Black Notes: Velbon Quick Release Platform 42mm Category:…
Variant with 42mm diameter. For example for Tamiya Opel Kadett C Coupe
This is an update to the original model. The first model had issues with flexing and bending. It also didn't clear the top and bottom flange of the Z-Axis. This model has added support to prevent flexing and has been trimmed to avoid…
Proposed print layout
This is a Remix of this Bottle drainer by Ataris : https://www.printables.com/de/model/397663-bottle-drainer Two pieces, just assemble togeher. No gluing. Basicly I remodeld the Bottle drainer to hold a trueFruits Bottle or probably any…
Designed for my 1ZPresso Q2S but may work on other grinders. The tip of the funnel is approx. 42mm external diameter so if your grinder is larger you might be in luck. Height from narrowest point of cone to tip of funnel externally is…
Dummyhub for 12x142mm thru axle. Category: Sport & Outdoors
Front protective caps for the Nikon Prostaff P3 (42mm) binoculars. Added a hole to attach them with a short piece of string. Resize stl to 101 - 102% when printing with PETG (gcode-file already adapted). Print 2 pieces (gcode-file prints…
Remixed the hook for 42mm tubes Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 25 Filament: any PETG ABS any Category: Outdoor & Garden
Description: Forged in faith and armored in pure resolve, the Ironclad Oathbreaker is a powerful divine cleric designed to bring an imposing presence to any tabletop RPG or miniature collection. With heavy, ornate plate armor, a massive…
I've been working on this for a while now. This is version 4. I did a test print of version 3 (the files you see) and just needed to add one small thing to it to get the connection between the halves ready, so I did that, and I'll do…
Using flexible TPU filament and choosing appropriate sizes during customization it fits well and pretty easy to handle and clean. After several attempts with rigid PLA it is a charm in our bathroom. The hexagonal pieces allow a quicker…
Cubicle coat hanger for 42mm wide cubicle wall.
Sig Sauer Zulu 5 (10x42mm) Binocular: Anti Reflection Device (ARD) aka Killflash, Binocular Cap and Shock Collar System
Fairing Pin Reinforcement Collar Honda Transalp 650 - Collarino di rinforzo colonnina perno Carena Misura 42mm Transalp 650 Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
Post stopper with 42mm inner diameter There are two versions to choose from: long and short I printed with ASA filament nozzle 0.4 stroke 0.2 printing time 3.5 hours with supports without filling 0% Number of walls 4
Replacement for the usually gooey or brittle 42mm plug used to seal 42mm holes in the wiper compartment of W639 Viano and Vito. Might fit other Mercedes Benz models BEWARE, this is made to print in TPU/Flex. Using any other non flexible…
These parts were designed for a 42mm steel pole used as a combined CCTV and Wi-Fi mast bolted to the side of a building. Any pole size can be set using OpenSCAD - just change the variables at the top. The fittings are parameterised…
PETG - printed with organic supports
Ideal para cambios de retenes de horquillas con barra de 42mm, no daña la superfície de goma del retén. Se recomienda usar un martillo de nylon para golpear la herramienta y encajar los retenes en su posición.
Scope Throw Lever with a 42mm inner diameter. Loosely inspired from https://www.printables.com/model/507645-clamp-on-throw-lever-for-athlon-btr-gn2-scope but these don't fit my scope, so I completely design it by my own. The knurling and…
My wife ask me for some specific 42mm bottles organizer, so she can utilise space of the top deep cabinets on our kitchen. Here it is. I specially made them not too tight, so they can handle some not exactly 42mm bottles, like fake sugar…
This is a right angle vacuum hose adapter to connect a Vacmaster hose to a Dewalt DWS715 miter saw. This is designed to be a female to female adapter, with a 42mm inner diameter on the long side, and a 45mm inner diameter on the short…
This Gridfinity module (5.5x5, 42 grid) is designed to perfectly hold 8 IKEA Citronhaj 35 cl spice jars. The staggered row layout maximizes space efficiency, allowing all jars to fit neatly within a compact footprint. Since it sits over a…
Two files: a high-torque and low torque version. They both share the same tooling, but one has a longer handle. I made the second one after finding out that my caseback was really on there. Printed with .15mm layer height and 15% infill…
It's an insulator for an electric fence that fits a 42mm post.
A redesign / remix of the 100mm blast gate by PeterH1500. I originally scaled down his model to suit 42mm PVC push fit tubing. This worked but resulted in very thin walls. I therefore decided it would be a good CAD learning exercise to…
Der Adapter von 42 mm (Schlauchseite) auf 1 ¼ Zoll (Zusatzteile z.B. Fugendüse) diese ist bei Dewalt-Deutschland nicht verfügbar.
Holds 3x 42mm flashlights. Created for my Duracell flashlights, as it has 4 tabs on the sides.
From factory my scope came with a 29mm to 38 mm adapter. I didn't find any 29mm to 42mm adapter so I made one.
Sprüh - Dosenhalter für bis zu 70 mm Durchmesser 6 * 70mm Durchmesser + 2 * 42mm Durchmesser Flaschen
I made this because I didn't have the proper tool available, and needed some more grip to loosen some large hex nuts holding the crosstube barbs of a BlueBoat . The internal nuts (inside the hulls) are in quite a confined space, and my…
Dieser Felgen-Reifen Naben Bock ist ein praktisches Montagehilfsmittel, das speziell für Arbeiten und Montagen an Felgen Naben entwickelt wurde. Er überträgt die Einpresskräfte optimal in den Boden, wodurch du mit weniger Kraftaufwand die…
This is a remix of this original file by teamRibcage . This small parts tray remix works with a 42mm diameter bike stand. I also edited the tray with a tool catch instead of the axle holder. There is an attached .stl file, as well as a…
42mm air tube connector for diesel heater. print in ASA or ABS because of the heated air
I wanted to build the Variable Openmod DIY headphones with drivers/transducers from my sennheiser headphones. The drivers have 42mm diameter and are built into most over-ear headphones in the HD500 series (also Momentum). The drivers…
I moved the HSW Insert down to the printbed to print without supports and made the holder 7mm longer for more safe grip for the pliers.
I printed this plan and realized it didn't fit my withings scan watch, so I took the inspiration from the plan and designed my own stand. If you print it, and it works for you, please rate it and post a make, that would be highly…
nozzle organizer adapter for a small ring box (42*42mm)
Durch einen Unfall mit dem Rasenmäher haben wir den Deckel von unserem Batteriebetriebenen Maulwurfschreck verloren. Hier ist ein Ersatzdeckel. Due to an accident with the lawnmower, we lost the lid of our battery-operated mole repeller.…
![HSW 42mm Cooking Sprayer Holder [Honeycomb Storage Wall]](https://media.printables.com/media/prints/626622/images/4968318_6d56e2db-ee83-460e-a86a-01f4cce8cb8f_e2567c47-794c-4cc4-89f3-f12100d993c4/pxl_20231026_032312023.jpg)
![W639 - 42mm plug - A1009870044 [Scheibe] - Vito / Viano Mercedes Benz](https://media.printables.com/media/prints/9efeb331-90d2-427e-98a7-7c6ae16ee987/images/9725173_94da1573-0068-43e2-a5ca-d3a95fc459fe_2315b8ff-fb92-4834-8458-d30913b8157e/img_5162.jpg)
