1 / 1
Parameterised fittings for a 42mm steel pole mast - top cap, bottom cap, shim for bolting to a flat surface
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fittings for a steel pole used as a mast to mount hardware to a flat surface, and end caps to keep water and birds out.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 31
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
These parts were designed for a 42mm steel pole used as a combined CCTV and Wi-Fi mast bolted to the side of a building. Any pole size can be set using OpenSCAD - just change the variables at the top.
The fittings are parameterised OpenSCAD designs with STL compiled for a 42mm steel pole:
- Top cap to keep rain and birds off the top
- Bottom cap with a drain hole (just in case)
- Shim to allow bolts to attach the circular pole to a flat surface