1 / 1
Parameterised fittings for a 42mm steel pole mast - top cap, bottom cap, shim for bolting to a flat surface
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fittings for a steel pole used as a mast to mount hardware to a flat surface, and end caps to keep water and birds out.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
These parts were designed for a 42mm steel pole used as a combined CCTV and Wi-Fi mast bolted to the side of a building. Any pole size can be set using OpenSCAD - just change the variables at the top.
The fittings are parameterised OpenSCAD designs with STL compiled for a 42mm steel pole:
- Top cap to keep rain and birds off the top
- Bottom cap with a drain hole (just in case)
- Shim to allow bolts to attach the circular pole to a flat surface