1 / 4
Throw Lever (quick zoom change) for Ø42mm ring diameter — image 1
1 / 4

Throw Lever (quick zoom change) for Ø42mm ring diameter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

throw lever to quickly change the zoom level on a Vortex Crossfire 3-9x40 scope (or possibly any other with Ø42mm ring)

Rating
5 / 5
Likes
48
Downloads
358
Makes
3
Views
1,869
Reviews
2

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Attribution — Noncommercial — Share Alike

Always wanted a throw lever to quickly change the zoom level on my Vortex Crossfire 3-9x40 scope, so I made one. Actually two, one with a straight lever and one with an angled one to interfere less with the bolt handle (see images).

My rifle is a Ruger American Rimfire 8366 and the lever works just fine, but I guess there might be issues with other makes/models.

This uses a metric M3x25 screw and corresponding nut, however the hex cut in the print itself didn't sufficiently grab the nut for tightening all the way so I had to use little pliers.

This should fit any scope with a zoom ring of about Ø42mm - for other dimensions you might try scaling. Please bear in mind though that the screw hole might need adjusting if you choose to do so.

Printed this with 4 walls and 20% infill, as I've been having issues with uneven numbers of walls - should work fine with 2 walls though because there's not really much load on it.

Please handle your scopes with care and respect - I cannot take responsibility for any and all damages you might cause installing this lever.

Tags