Throw Lever (quick zoom change) for Ø42mm ring diameter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
throw lever to quickly change the zoom level on a Vortex Crossfire 3-9x40 scope (or possibly any other with Ø42mm ring)
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 358
- Wydruki
- 3
- Wyświetlenia
- 1869
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Always wanted a throw lever to quickly change the zoom level on my Vortex Crossfire 3-9x40 scope, so I made one. Actually two, one with a straight lever and one with an angled one to interfere less with the bolt handle (see images).
My rifle is a Ruger American Rimfire 8366 and the lever works just fine, but I guess there might be issues with other makes/models.
This uses a metric M3x25 screw and corresponding nut, however the hex cut in the print itself didn't sufficiently grab the nut for tightening all the way so I had to use little pliers.
This should fit any scope with a zoom ring of about Ø42mm - for other dimensions you might try scaling. Please bear in mind though that the screw hole might need adjusting if you choose to do so.
Printed this with 4 walls and 20% infill, as I've been having issues with uneven numbers of walls - should work fine with 2 walls though because there's not really much load on it.
Please handle your scopes with care and respect - I cannot take responsibility for any and all damages you might cause installing this lever.