A5 Narrow Planner Divider Tabs for paper 142mm x 210mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed with PLA, these dividers are flexible but retain their flat shape over time.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 49
- Makes
- 0
- Views
- 271
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I originally bought some A5 planner dividers on Amz but they curled up over time which drove me crazy. Designed and printed these thin planner dividers and it took a few tries, originally they were too thick and were too rigid, but think I got them just right with this version. They are about as thin as they can be printed with a 4mm nozzle, and they are nice and flexible but retain their shape. They print in no time and don't use much filament. I also included a blank spacer with no tab for the very front/back if desired.
I made my own planner out of leather with an A5 6-ring binder hardware from Amz and "A5 refill paper" that is actually a little narrower than true A5. The paper is 142mm wide and 210mm tall, or 5.6" x 8.25". These dividers are designed for this narrower paper, not true A5 which is 148mm x 210mm but they could be easily adjusted for that size too.