A5 Narrow Planner Divider Tabs for paper 142mm x 210mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed with PLA, these dividers are flexible but retain their flat shape over time.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I originally bought some A5 planner dividers on Amz but they curled up over time which drove me crazy. Designed and printed these thin planner dividers and it took a few tries, originally they were too thick and were too rigid, but think I got them just right with this version. They are about as thin as they can be printed with a 4mm nozzle, and they are nice and flexible but retain their shape. They print in no time and don't use much filament. I also included a blank spacer with no tab for the very front/back if desired.
I made my own planner out of leather with an A5 6-ring binder hardware from Amz and "A5 refill paper" that is actually a little narrower than true A5. The paper is 142mm wide and 210mm tall, or 5.6" x 8.25". These dividers are designed for this narrower paper, not true A5 which is 148mm x 210mm but they could be easily adjusted for that size too.