eSUN eVacuum Kit Pro pump holder for Multiconnect (OpenGrid/Multiboard)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiconnect compatible holder for the eSUN eVacuum Kit Pro pump.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This holder was designed for quick access to the pump, and as such holds it upside down using friction, and includes a small cutout so you can leave it plugged in and ready to go. Also includes a space to store a bag clip.
You'll need two Multiconnect flush big screws to mount: https://www.printables.com/model/1160115-flush-multiconnect-generic-connector-for-multiboar.
I kept the width of the connector to one Multiboard wide (25mm), but the width of the holder will encroach onto the adjacent grid slots. It should also work with OpenGrid, as that's a bit bigger still.
Original files can be found here: https://github.com/SiDtheTurtle/3DPrinting.