Floatwheel ADV Monster Rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom WTF style rails for the Floatwheel ADV based on The Float Life's Extended Steep WTF Rails
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Custom rails made for the Floatwheel ADV inspired by TFLs WTF Extended Steep and Deep rails.
My design increases the W angle from the factory 2.5 degrees to 5 degrees on each side (Steep and Deep). I also extended the rails by 20mm, letting you run most BTG tires without having to modify the stock fenders. You can also print my fenders that give additional clearance for massive tires like the Burris 6x8x12 (pictured). Although it is worth noting that the droptop will no longer mount onto this design.
I had these machined from 7075 aluminum for additional strength.