1 / 3
Nozzle - Wiley X Vapor Comm 2.5 - Novritsch AntiFog
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nozzle to use Novritsch AntiFog unit with 'Wiley X glasses using comm temples. Like the Vapor comm and Rogue comm.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (0)Kolekcje (11)Powiązane
This nozzle can be used with the Novritsch Anti-Fog unit (using 9mm tubing) and Wiley X glasses using comm temples. Comm temples can be recognized by their thin layout, suitable for use with over ear headset.
- The nozzle inlet is oriented up- and outward to be able to feed the silicone tube of the antifog unit while also wearing a helmet and over ear headset.
- The nozzle outlet is flat and pointing to the nose to orient the airflow over the whole area.
- The clip is made to fit tight over the temple. These stay put during multiple hour skirts.
- But pay attention to the tube length. If the tube is too long, it will push the glasses forward. Make sure to cut the tube at the correct place. The inlet has enough over length to compensate for a slightly shorter tube.
- Best use is to keep the nozzle connected to the tube and disconnect the nozzle from the glasses. After 2-3 tries you get used to connecting the nozzle to the temples.
This model is not symmetric. Print one mirrored to use it on the other side. Printed in PLA.