Salt/Pepper Grinder + Napkin Holder Centerpiece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A kitchen table centerpiece with space for salt and pepper grinders, as well as a napkin holder.
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 362
- Wydruki
- 5
- Wyświetlenia
- 1804
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
A kitchen table centerpiece with space for salt and pepper grinders, as well as a napkin holder.
STL and Fusion360 files are included so you can adjust the model to the dimensions of your grinders. There is a raised ring inside the grinder cutouts in order to help secure the grinder / guide it into place better.
Settings summary: 0.2mm height on 0.4mm nozzle, 15% Gyroid Infill, 3 walls, 3 layers.
Filament in images is Inland PLA+ Green.
No supports necessary for printers able to print on 60deg angles. I used a brim to prevent warping and help adhesion, but it may not be necessary. If you have particularly heavy grinders, you may want more infill immediately under the grinder cutouts.
Printed on Ender 3 V2 with mostly default settings, took 17 hours 15 minutes.
Cross posted: https://thangs.com/designer/derekpock/3d-model/Salt%2FPepper%20Grinder%20%2B%20Napkin%20Holder%20Centerpiece-1056300
Cross posted: https://www.thingiverse.com/thing:5207907