Liczymy pasujące modele…
Shaker Sizes (Diameter x Height): 42 x 35 mm 42 x 50 mm 42 x 65 mm Grids: small, medium, large, open closed, small, medium, open closed, medium, large, open Lids: plain “S” for salt “P” for pepper “C” for chili, curry “O” for oregano…
Wydruk około 2,40 €–2,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Color order: White then Red. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down.…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
Use the necessary things in your kitchen or make an original gift. I recommend printing PLA plastic. I made my model with a color change during printing. But you can use for example white and black for salt and pepper, respectively.
Wydruk około 4,22 €–5,16 € nettoWstępna wycena jednego wariantu
Should probably fit any pepper mill with a ø25 mm opening. Print in vase mode with 2 walls
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Another jibbitz for crocs. Red and White PLA with MMU3. .15mm/layer, 100% infill with ironing, organic supports. Thanks to @Wprints_1300898 for the STLs. P.S. I used transparent red - really makes it pop. :-)
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
Einfacher und schnell zu druckender Untersetzer für Salz- und Pfeffermühlen der Marke Peugeot (6 cm Durchmesser). Nach Gebrauch krümeln die Gewürzmühlen oft noch etwas. Damit nicht die halbe Küche vollgekrümelt ist, haben die Mühlen jetzt…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
This is Peppermint Patty ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Pair of salt and pepper shakers designed to mesh together and turn as gears upon their stand. The bottom is threaded to fill the shakers. Enjoy and happy printing! :-)
NO AMS, NO SUPPORTS ✅ Use glue when assembling 💧 Don't forget to give me a like 🧡 Share photos of your prints 🌶 ©Personal use only 💀 👉 Check My Patreon and Boosty 👈 Join my Telegram! ⭐💬
Salt shaker in a kind of spiral design. I printed the salt shaker in PLA with a leyer hight of 1,5mm. The cap for the pepper shaker has only five holes (Model also attached). Important: If the screw cap is difficult to turn at first,…
Roblox Grow a Garden-inspired fruit & veggie set: tomato, cocoa, bell pepper, apple, mango
Here we have a water tower that borrows design ideas from Kim Brumble's on thingiverse but with some significantly different features and dimensions. Thank you to Kim for sharing his modeling work. The tank is designed for printing with…
Feel free to support my work and leave a tip.
Fill one side up with pepper and the other one with salt. By twisting the plugs, you can open and close the slit on the shakers side, to dispense some flavour on to your meal It is best be printed in its given orientation but due to its…
If you are looking for a fun way to Spook up Dinner time Here are the files for my Halloween Salt and Pepper Shakers The Stones print great with zero supports and I would suggest printing the Bung/Plugs in a flexible filament, though I…
A nice printable logo of Dr. Pepper. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 15% Filament: Hatchbox PLA
Make sure you educate yourself about the potencial health risks! Microplastic is not good in the food for sure. Some people say it's okay to use it, some people say not. You decide how you use this model. Be responsible! Salt and pepper…
Holes in cup 2mm(H) 2,5mm(I) and 3mm(J). Jars diameter cca 40mm, volume cca 80-90ml. Walls thickness 2mm. For salt recomended J2 cup, for pepper H2. Filament need for shaker (jar with cup) cca 12m. Tested PLA 0,2mm, random seam. Spice…
A kitchen table centerpiece with space for salt and pepper grinders, as well as a napkin holder. STL and Fusion360 files are included so you can adjust the model to the dimensions of your grinders. There is a raised ring inside the…
I made some good examples but encourage you to set your own!
FULL CREDIT TO infocus ON THINGIVERSE. UPLOADING HERE TO SHARE WITH THIS COMMUNITY. Summary Salt and Pepper shaker for camping and backpacking. To fill: -Pour spice on a piece of paper -Fold paper -Pour into triangular opening on…
My favourite spice container for camping and backpacking trips. --- Print with 3 perimeters.
A name plate to go above our family dogs bed.
This is a Salt & Pepper Shaker in the form of a “ MOAI ” with a Tray You can print without support !!! Printer : Flsun V400 Walls 3 ; top 4 ; bottom 4 layer height : 0,1 line width : 0,6 – Shaker layer height : 0,07 line width : 0,4 –…
Printing this should take approximately 4 hours, and it's strongly recommended to use supports. The shakers are designed with a convenient TOOL part that allows you to refill them easily by opening the bottom hatch. I've ensured that salt…
A bell pepper for pretend play, no supports needed. Colors used- Polymaker Polylite Wine Red PLA, Polylite Green PLA and Panchroma Mars PLA
0.15 layer height no supports prusa mini
I was looking for relatively large holes allowing the salt to flow easily. I also wanted a salt shaker that could be filled from the top. Then I added a pepper shaker to match. I printed them on PLA with 0.15 mm height. They print without…
Thank you so much for the 'Mechanical Salt and Pepper Shaker' from @ArgiCZ . It has been adorning our dining table for quite some time now and is almost in daily use. I’ve also added a napkin holder for small napkins, approximately 10 x…
Fits 1.5 and 1.8oz cans from Sabre / Fox It's a snug fit, shouldn't need any other securing. Though I did put provisions if you wanted to put a third velcro tie around the canister Suggest 0.2 layer height Use velcro ties to secure
Easy Fill Pepper Mill / Grinder You may have seen a few pepper grinder designs on the internet. I wanted to create a fully 3d printed pepper grinder that didn’t just kind-of-work-ok-ish… I wanted to make one that would look good, be…
Hey! This is a self-protection pepper spray holder for your bike. It fits on bidon screw on your frame. Usually it's mounted on bottom screw of vertical bidon mount. It only uses 1 screw and it's tight fit for the pepper spray. It's…
Printer: Bambu Lab P1P Filament: Bambu Lab Metal PLA - Cobalt Blue Salt and Pepper: Le Creuset Marsaille Blue
This is a simple print that turns your empty jars of “Glück Mini” jam into decorative salt and pepper shakers. I printed the tops from PLA at 0.15mm to make the slight overhang for the knobs inside a bit nicer. The Flexring is printed…
I got a request to do salt and pepper containers to look like a shotgun cartridge. Made a container for chili, 1 clean with holes and 1 clean without as well. And a TPU cap. Made the bottom with 4 loops 0,2mm layer height to get little…
bicycle pepper spray 35mm holder with screw or strap fastening
Similar to the original lens covers, these fit in Israeli gas masks. Visibility through them is surprisingly good if you're just after that aesthetic. Holes are 1/8 inch diameter. Printed in PETG. Category: Costume
Say goodbye to manual pepper grinding and hello to effortless seasoning! Unleash the power of your drill with this adapter designed to seamlessly transform your pepper (or salt) grinder into a high-speed seasoning powerhouse. No more…
Dies ist eine verbesserte Version 2: Deckel lässt sich weiter öffnen Deckel wurde verstärkt an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder…
Wanted a smallish funnel for my salt and pepper mill (Zassenhaus brand). 26 grams of filament print with the wide bit at the bottom design is in mm's (slicer asked about it) printed on basic settings
Version shown in photos is at 200%, generic PETG, 0.4 noz, 0.2 layer with 15% gyroid infill Print time at default (100%) size: 2.5hrs/44.2g of material Print time at 200%: 11h50m/222.74g of material Printer: Prusa MK4 w/current f/w
Really easy to print with and without support. For anyone who is to lazy to fill the pepper mill only with a spoon.
These salt & pepper shakers use a base of PETG or PLA, with the black or white handle in TPU. Use sea salt and peppercorns. The internal grinding mechanism is https://www.crushgrind.com/products/crushgrind-shaft 123 mm version. The…
Adapter to connect a WMF grinder to a glass with standard thread, for best durability print with PETG. For best results print the bigger diameter on the printbed.
My buddy wanted a salt and pepper shaker holder to go on his side table. It has a mounting point in the center to screw the holder down to his table. On the back side it also has a small clip for him to put notes or letters of importance.…
Wanted a smallish funnel for my salt and pepper mill (Zassenhaus brand). 26 grams of filament print with the wide bit at the bottom design is in mm's (slicer asked about it) printed on basic settings
Model has approximately 7cm tall and 3,7cm of diameter Printing notes Layer height: 0.12 mm Infill: 25%
Funnel for a Battery operated Salt and Pepper. Base diameter is 33mm to fit inside the salt/Pepper Vessel. print with the large opening on the baseplate.
Just a quick print to add a shaker lid to the larger glass ground pepper containers you can buy at Sam's Club. The container lid still fits as well. The shaker lid friction fits with a little pressure. Happy cooking!
Einfacher und schnell zu druckender Untersetzer für Salz- und Pfeffermühlen der Marke Peugeot (6 cm Durchmesser). Nach Gebrauch krümeln die Gewürzmühlen oft noch etwas. Damit nicht die halbe Küche vollgekrümelt ist, haben die Mühlen jetzt…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
How to print: Start with white filament, then switch to black. Add pauses before printing in your slicer.
Funnel to fill the Männkitchen mills. Diameter at the lower end is 44mm. I belive the pepper canon has an internal diameter of 44.4mm, so you could go even slightly bigger if your tolerances allow. I opted for 44mm as that allows the…
Practical holder (menage) for a salt and pepper mill – ideal for the kitchen or dining table. The mills stand securely and neatly next to each other and are always within reach. I printed the cruet set using extrudr PLA NX2 MATT . For…
Meet Pepper Punk, the bell pepper who woke up on the wrong side of the salad. He’s squat, stocky, and permanently mid–pep talk (“put ’em up!”). Park him on your desk for instant sass, guard your spice rack, or drop him into a tabletop…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A small bowl that looks like Spaghetti. It comes with meatball salt and pepper shakers! A cute little addition to…
Update 27.1.2026: Added a longer barrel axle to the root, this is about .5mm longer than the original so it should sit perfectly flush instead of under tension like the old one. This might result in a loss of performance. If you dont want…
Deutsch: Praktische Halterung für drei Russell Hobbs Pfeffermühlen. Diese Halterung bietet Platz für bis zu drei Russell Hobbs Pfeffermühlen und sorgt für Ordnung und elegantes Design in Ihrer Küche. Gedruck aus PLA und TPU-Boden,…
Just print in TPU, No support needed. If you want, You can add a stop to the print and change color to black, To make a stripe that will help you distinguish between salt and pepper. Please let me know how you enjoyed it or if printing…
A TPU gasket for helping seal the Wiley-X SG-1 glasses against chemical agents such as teargas or pepperspray. The SG1 glasses/goggles are great for ballistic protection for protestors/observers, and are one of the only ballistic glasses…
This salt and pepper dispenser holder is designed to keep your countertop clean by catching the leftover salt and pepper that often falls out of grinders after use. While many holders like this already exist, the main difference here is…
Dr Pepper and Diet Dr Pepper Folding Door Display Box The Dr Pepper Folding Door Display Box is a compact display case inspired by the classic soda brand. It features a segmented folding-door mechanism that opens smoothly to reveal the…
Pièce de rechange pour le hachoir Alessi. La paroi du fond a été épaissie par rapport au modèle original pour réduire la flexibilité. Spare part for the Alessi mincer. The bottom wall has been thickened compared to the original model to…
Romantic heart model designed for Valentine’s Day. Perfect as a decorative piece or small gift. Designed to be easy to print and suitable for beginners. It can be refilled through the holes in the back (use the caps to close them). 🖨…
This wall mountable rack for three usb charged gravity pepper mills comes in two parts for easy printing and assembly.
Adapter to connect a WMF grinder to a glass with standard thread, for best durability print with PETG. For best results print the bigger diameter on the printbed.
The Pepper in a Can Challenge is a classic test of indoor gardening - growing a productive pepper plant in the limited root space of a soda or beer can. It’s perfect for winter growing, but cans are notoriously unstable, prone to leaking,…
Replacement Lid for the WMF Trend Spice Mill. I recommend printing it upside down as its creates a cleaner inner surface which make cleaning easier. Supports are generally required, as it has a slightly curved top. Happy Printing!
Holds the large Salt and Pepper grinders. The middle is convex, so the grains that build up are easy to clean
The hat will have to be glued on or otherwise secured. arms made with Tinker Cads basic connectors should snap together. Originally printed on the AD5X. Supports Required. Single Color Print Inspired by LAM.
These salt & pepper shakers use a base of PETG or PLA, with the black or white handle in TPU. Use sea salt and peppercorns. The internal grinding mechanism is https://www.crushgrind.com/products/crushgrind-shaft 123 mm version. The…
'Working' prop of the Villiers 9mm Pepperbox Pistol , our "hero's" sidearm from Disco Elysium. Pull the trigger to drop the hammer, manually advance to the next round. Note: The barrels do not revolve when pulling the trigger. Early…
The Ultimate Pepper Seedling System. Get your Pepper season started right with this optimized 3D-printed starter kit. Designed specifically for young pepper plants, this system focuses on pepper root development and easy maintenance.…
Print - Print Orientation: Print flat with the holes facing up. This gives clean holes, avoids internal supports, and improves fit. Material: PETG recommended for moisture resistance. PLA+ acceptable for dry salt only. Avoid ABS and TPU.…
Printed In Elangoo Hyper Pla plus on my Ender 3v2 took abot an hour :)
Thanks to download & ❤. This caddy is designed to fit these salt & pepper grinders: https://www.printables.com/model/1611093-salt-and-pepper-grinders-with-tpu-knobs If you're liking these colors, the filaments are Prusament PETG pistachio…
It is a salt/pepper shader formed as a sheep. It is hollowed to be filled with salt or pepper, which can be poured of the nose. I've printed a pig salt shaker for my brother and now it gets a sheepy pepper counterpart :) Unfortunately the…
This Minimalistic Salt & Pepper Shaker set is designed to blend seamlessly into modern kitchens while remaining highly functional. Each shaker features a simple cylindrical form, measuring 86 mm in height and 30 mm in diameter , offering…
Small holder for a pepper grinder so you don't get pepper everywhere. Has a depression in the middle to catch pepper.
Use tree supports. A small articulated desk buddy inspired by a bell pepper. The model features movable legs connected with print-in-place joints, allowing simple posing and interaction. The arms are fixed, while the rounded pepper shape…
Keep your dining table and kitchen counter organized with this simple, functional, and stylish salt and pepper shaker holder. Dimensions: Each compartment is designed to fit square shakers with a maximum size of 47 x 47 mm . Key Features:…
Salt and Pepper Shaker with Handle A simple salt and pepper shaker with a handle that is easy to print and can also be customized afterwards. I printed and tested the model myself successfully. Files Included are: a 3MF file for direct…
Coaster & Transport lock for Peugeot Salt & Pepper Mills to avoid mess on the table and on the way to the table ;)
Percy de Rolo's Pepperbox from the show the legend of vox machina: includes an (untested) racheting mechanism to turn the barrel while cocking the hammers. the Stl is uploaded in a single file, but with the use of slicer tools (such as…
A simple Caddy / Holder for IKEA CITRONHAJ dispensers and spice mills. For the handle to thread in correctly you have to calibrate your printer to some degree. Print Suggestions: PETG reccomended; Central Stem >50% infill, aim for good…
Object description: This is an insert for a Fuchs pepper shaker. The model includes a 0,4mm thick support layer which should be printed in a different material as the main part. It is divided into two halves to make it easier to remove.…
Used to store generic salt and pepper holders you can get at almost any store.
Doporučuji vytisknout logo Dr Pepper jinou barvou aby, byl tisk hezky barevný. Hlavní využití tohoto víčka je ochrana před vlítnutím vosy do plechovek. Velikost tohoto víčka je pro normální plechovku piva.
Made as a birthday gift. The model consist out of two parts, these can be assembled and fixed together by a m2x8 bolt and m2 nut.
Salt & Pepper Funnel to help refill shakers. This was designed to fit Cole&Mason electric Grinders but may fit others.
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- If you’ve been struggling with a loose lid on your salt and…
